Ai SolventVap 50L Rotary Evaporator w/ new ULVAC Pump & Chiller

SKU# SE50-C30-UDP6

A$ 39,990.00 A$ 35,991.00 35991.0 AUD

A$ 39,990.00

Excl. GST

    This combination does not exist.

    SKU # : SKU# SE50-C30-UDP6

    Terms and Conditions

    A rotary evaporator is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. The process of rotary evaporation is most often used to separate solvents with low boiling points, such a n-hexane or ethyl acetate, from compounds which are solid at room temperature and pressure. However, careful application also allows for the removal of a solvent from a sample containing a liquid compound, if there is minimal co-evaporation (azeotropic behavior) and a sufficient difference in boiling points at the chosen temperature and reduced pressure.




    Example:The following table is a list of a variety of substances ordered by increasing vapor pressure (in absolute units).



    The new Ai SolventVap 50L (evaporating flask capacity) series rotary evaporators come with vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.

    Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.

    Digital water bath operates from ambient temperature to 99°C with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.

    Standard Glassware Set includes 50 liters round-bottomed evaporating flask, 20 liters round-bottomed receiving flask, and vertical condenser. Rotary evaporators with vertical glass condenser are great for distillation of solvents with higher boiling points.


    • Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
    • Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
    • Downward-condensing vacuum connection design ensures safe vacuum operation.
    • Motorized water bath lifting for precise control.
    • Easy, straight-forward visual operation with digital speed and temperature display.
    • PID temperature controller ensures accurate temperature control is maintained.
    • One year warranty and lifetime US-based parts and service support.

    Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.


     Electrical requirements
     380-415V 50/60Hz 3-phase, 9A, 6300 watts (rotation speed: 250 watts)
     Evaporating flask
     Capacity: 50 liters
     Maximum load: Not to exceed 60% of the flask's capacity
     Sealing flange: 4.9"/125mm diameter
     Rotation speed: 10 to 110 rpm
     Evaporating speed: 
    9L/hour (water), 19L/hour (alcohol)
     Receiving flask
     20 liters
     Condenser Glassware: Main + auxiliary triple-circulating cold traps, vertical
     Chilling fluid connection: 3/8" hose barb x 4 (2 on main + 2 on auxiliary)
     Working environment
     -15 to 35°C
     Water bath
     Temperature range: ambient to 99°C
     Temperature controller: digital
     Dimensions: 21.7" diameter x 12.6" depth
     Material: stainless steel
     Media: water
     Number of heaters: three
     Drain port: one
     Lifting: Motorized + manual
     Maximum lifting distance: 9 inches
     Vacuum level < 3 torrs / 0.4 kPa
     Vacuum sealing PTFE + Vinton gaskets
     Vacuum connection 3/8" hose barb x 1
     Safety Dry-run, over-temp shut-off, built-in circuit breakers
     Unit dimensions (WxDxH) 1320 x 760 x 2340 mm (fully assembled)
     Shipping dimensions (WxDxH)
     1170 x 710 x 1470 mm (Evaporator), 1040 x 860 x 840 mm (glassware)
     Shipping weight 240 kg




    SE50-C30-UDP6 Standard Package

     Part description


    Part image

     Ai -30°C 40L capacity recirculating chiller1 set
     ULVAC UDP-6 6 CFM 9 Torr 2-stage diaphragm pump
    1 set 
     Ai SolventVap 50L rotary evaporator and water bath
    1 set
     Vertical main and auxiliary condensers and insulation
    2 sets
     50L evaporating flask and 20L dual receiving flask with detachable drain port
    2 pcs
     Three-way tee vapor buffering flask, glass
    1 set
     Glass vapor duct with seal (pre-installed)
    1 set
     PTFE vacuum sealing kit (pre-installed)2 pcs
     Receiving flask glass vacuum port with PTFE open/close valve, glass
    2 pcs
     Glass material feeding tube with PTFE open/close valve and PTEF extension tube
    1 set
     Stainless steel pole and mechanical vacuum gauge
    2 pcs
     Silicone vacuum tubing
    10 ft
     Rubber-wrapped support and bracket4 pcs
     Flask quick clamp with PTFE centering ring
    7 sets
     GL18 connector
    5 sets 
     Evaporating flask cap spanner
    1 pc
     Allen key and inner hex screws1 set
     Ai 50L stainless steel 50L flask carrier / stand1 pc
     Ai plexiglass water bath cover for SolventVap 50L 1 pc
     User's manual1 pc