Ai WAC-2 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. two sets of water manifolds included for immediate use.
Specifications
Model
WAC-2
Input power
220-240 VAC 50 Hz single-phase (1PH) 2360 watts
Nominal cooling capacity
4446 kcal/h
Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12°C Outlet chilled fluid temperature: 7°C Inlet cooling air temperature: 30°C Outlet cooling air temperature: 35°C
Compressor
Power: 220-240VAC 50Hz 1-PH, 5KS225, thermally protected Refrigerant: R410A Number of compressor installed: one
Make: MAER (YWF74L34P4 -350) Power: 220-240VAC 50Hz 1-PH 150 watts 0.56A 1387rpm 4uF/450V IP54 Flow rate: 2,000 cu ft per hour Number of fan installed: one
Temperature accuracy
+/- 2 °C
Water inlet & outlet on chiller
KF40 flange
Manifold
Inlet: 1/2”, outlet: 1/2”
Unit/shipping weight
90 kg / 108 kg
Unit/shipping dimensions
600 x 500 x 850 mm / 810*600*1200 (DxWxH)
Safety
Over current and compressor thermal protection
Working environment
Temperature range of chilled fluid: 5°C - 35°C Temperature difference of chilled fluid between inlet and outlet: 3°C - 8°C. It is better to use the chiller while the ambient temperature at or below 35°C
Compatiable Ai induction heaters
High frequency 4kW, 6.6kW Mid frequency 15kW, 25kW Low frequency 15kW