Ai WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. two sets of water manifolds included for immediate use.
220-240 VAC 50 Hz single-phase (1PH) 1300 watts
Nominal cooling capacity
Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12°C Outlet chilled fluid temperature: 7°C Inlet cooling air temperature: 30°C Outlet cooling air temperature: 35°C
Power: 220-240VAC 50Hz 1-PH, LRA42, thermally protected Refrigerant: R407C Number of compressor installed: one
Make: Kunli (YWF A2S-300S-5DIIIA05) Power: 220-240VAC 50Hz 1-PH 155 watts 1.35A 2700rpm 16uF/500V IP44 Flow rate: 70,000 cu ft per hour Number of fan installed: one
+/- 2 °C
Water inlet & outlet on chiller
Inlet: KF40, outlet: 8mm quick connect with ball valve
90 kg / 118 kg
740 x 430 x 890 mm / 910 x 530 x 1070 mm (DxWxH)
Over current and compressor thermal protection
Temperature range of chilled fluid: 5°C - 35°C Temperature difference of chilled fluid between inlet and outlet: 3°C - 8°C. It is better to use the chiller while the ambient temperature at or below 35°C
Compatiable Ai induction heaters
High frequency 4kW, 6.6kW Mid frequency 15kW, 25kW Low frequency 15kW
WAC-1 recirculating chiller
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.