Ai WAC-2 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. two sets of water manifolds included for immediate use.
220-240 VAC 50 Hz single-phase (1PH) 2360 watts
Nominal cooling capacity
Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12°C Outlet chilled fluid temperature: 7°C Inlet cooling air temperature: 30°C Outlet cooling air temperature: 35°C
Power: 220-240VAC 50Hz 1-PH, 5KS225, thermally protected Refrigerant: R410A Number of compressor installed: one
Make: MAER (YWF74L34P4 -350) Power: 220-240VAC 50Hz 1-PH 150 watts 0.56A 1387rpm 4uF/450V IP54 Flow rate: 2,000 cu ft per hour Number of fan installed: one
+/- 2 °C
Water inlet & outlet on chiller
Inlet: 1/2”, outlet: 1/2”
90 kg / 108 kg
600 x 500 x 850 mm / 810*600*1200 (DxWxH)
Over current and compressor thermal protection
Temperature range of chilled fluid: 5°C - 35°C Temperature difference of chilled fluid between inlet and outlet: 3°C - 8°C. It is better to use the chiller while the ambient temperature at or below 35°C
Compatiable Ai induction heaters
High frequency 4kW, 6.6kW Mid frequency 15kW, 25kW Low frequency 15kW
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.